NetAgent A
NetAgentA
  • HTTP/HTTPS
  • TELENT/SSH
  • FTP/FTP-SSL
  • Информация SSL
  • Настройки RADIUS Сервера
  • LDAP Server
Management Protocol
This section is to enable HTTP/HTTP proxy or HTTPS/HTTPS proxy funciton and to set port.
HTTP/HTTPS Account
Имя пользователя This section is to set a user name for NetAgent web pages. It is valid for up to 8 users. Users have to input the user name to get access to NetAgent web pages from a web browser.
Пароль This section is to set a password for NetAgent web pages. Users have to input the password to get access to NetAgent web pages from a browser.
Полномочия This section is to set users' authorizations of Read, or Read/Write.
IP-адрес администратора This section is to set a particular IP address. Users can only gain access to NetAgent web pages if they come from this IP address. If you want to manage NetAgent from any IP address, you can set it as *.*.*.*
Автоматическое отключение после простоя в течение _ минут (0: Отключить) When user login to the webpage, if idle for X minute which configured, it will log out automatically.
 
 
Please refer to "HTTP/HTTPS" tab for the settings.
 
 
Please refer to "HTTP/HTTPS" tab for the settings.
 
HTTPS Protocol
This section is to enable HTTPS Protocol.
Информация SSL
Ключ коллективного пользования SSL This is to upload the SSL public key.
Длина ключа коллективного пользования This section is to show the length of uploaded Pubilc Key.
Сертификат SSL This is to upload the SSL public key.
Выпущенный для This section is to show the information of uploaded Pubilc Key.
Выпущенный This section is to show the information of uploaded Pubilc Key.
Действительный с This section is to show the information of uploaded Pubilc Key.
Действительный до This section is to show the information of uploaded Pubilc Key.
 
* This is to configure the parameter of the radius server. Please refer to the appropriate radius server setting.
 
Адрес сервера RADIUS To configure the RADIUS server's IP Address.
Аутентификационный порт To configure the UDP port to use.
Ключ коллективного пользования The password to connect with RADIUS Server.
Задержка соединения The timeout for completion of RADIUS's request.
Переподключение To configure the number of retries to login.
 
 
This is to configure the parameter of the LDAP server. Please refer to the appropriate LDAP server setting.