NetAgent A
NetAgentA
: NetAgent Cloud Online
: NetAgent Cloud Offline : Go to NetAgent Cloud Settings
: Current user : Log Off
Information
Configuration
Log Information
AI Analysis
Management
SNMPView Lite
  • Debug Information
  • Port Information
 
Sent Information This column shows the real time sent command.
Received Information This display the response that NetAgent receives from UPS.
 
* Serial port settings apply to Manual Debugging Mode only. Not valid in Automatic Mode or during normal NetAgent-UPS communication.
 
To configure the communication parameter between NetAgent and UPS. Parameters are Debug Mode (this could select between Auto or Manually, default is Auto); Port; Speed (Baud), Data Bits;Parity and Stop Bits.
Two encoding formats: ASCII or Hexadecimal.
When debug mode is manually, user could enter its parameter under Send Contents column.