NetAgent A
NetAgentA
  • SMS Modem Settings
  • SMS Setting
  • Mobile for Event Log
SMS Modem Settings
Modem Communication Port This section is to set the port of Modem.
SMS Communication a: GPRS -- To use with GSM 900/1800 frequency, and make sure the local telecom supports such service.
b: CDMA -- To use with GSM 800/900/1800 frequency, and make sure the local telecom supports such service.
SIM Card PIN Enter the SIM password.
Confirm SIM Card PIN SIM Password must match the one set above.
Send Message
Cellular Phone number This section is to set mobile to receive SMS.Please Use comma between numbers.
SMS content (Max. 70 characters) Message Content will be sent. Maximum 70 words & symbols.
 
 
Send SMS When Event Occurs Choose between "Local Modem" or "Remote Service(e.g. SMSAgent, PC/server with SMS Server or NetAgent with GSM Modem)" to send SMS.
SMS Server, SMS Server Port This section is to set Remote Service device’s IP address (e.g. 192.168.0.180) and Port Number (default:80).
Account Name, Password This section is to set Remote Service device’s account, password.
Sending test SMS This is to send a test SMS when configuration completes.
 
 
This section is to set the recipient’s mobile number. A total of 8 mobile numbers can be assign.
Note:
a: Enter mobile number same as sending from mobile.
b: Please refer to SMSAgent’s user manual for further information.