NetAgent A
NetAgentA
Bilgi
Ayarlar
Kayit Bilgileri
Management
  • IPv4
  • IPv6
  • Ethernet
  • Dinamik DNS
  • PPPoE
IP Adresi
IP Adresi This section is to set NetAgent IP address.
Alt Ag Maskesi This section is to set NetAgent Subnet Mask.
Ag Geçidi This section is to set NetAgent Gateway.
IP Adresini Alma This section is to choose to set NetAgent IP address manually or via DHCP.
* The above 4 sections can be set in Netility as well. NetAgent will reboot after any of the above are changed.
DNS Server IP
Birincil DNS Server IP This section is to set NetAgent primary DNS Server IP address.
Ikincil DNS Server IP This section is to set NetAgent secondary DNS Server IP address. NetAgent will use the secondary DNS Server IP address when the Primary DNS Server IP address is not working.
 
 
Please refer to "IPv4" tab for the settings.
 
 
Baglanti Tipi This section is to set communication speed between NetAgent and Network. NetAgent will reboot after Connection Type is changed.
Ethernet baglantisi koptugunda UPS Iletisimini durdur This section is to set if stop UPS communication when NetAgent disconnects with Ethernet.
Modbus on TCP Device ID This section is to set Modbus on TCP Device ID.
 
* This is a free service that allows the user to alias a dynamic IP address to a static hostname.
 
Servis Saglayici NetAgent can be configured to register with any of the Dynamic DNS providers.
In general, to register a Domain Name;
a. Go to the DDNS provider website listed.
b. Register a new user account and password with the DDNS provider.
c. Choose a Domain Name to point to your current Dynamic IP
d. Enter information obtained in (b) and (c) into NetAgent DDNS fields
Alan(domain) Adi This is the Domain Name you have created from the above selected DDNS provider.
Oturum Açma(Login) Adi This is the Login / Account name that you have created with the selected DDNS provider.
Oturum Açma(Login) Parolasi Enter the Password you have assigned to your DDNS Account.
Kayit genel IP'si elde etmek için harici STUN Server kullan Choose Yes to ensure that NetAgent uses the WAN / Public IP to update the selected DDNS server.
 
* Use this option to allow NetAgent to connect to the Internet directly using your xDSL modem. Once set-up, NetAgent will connect directly to the Internet without going through a router. The LCD will display the current WAN / Public IP instead of the LAN IP Address.
System will reboot if any configuration applies.
 
Baglanti yapilacagi zaman This is to set if use PPPoE to connect with NetAgent UPS.
Disabled -- Default setting.
Connect always -- NetAgent will automatically dial up and maintain continuous connection.
Oturum Açma(login) Adi Enter the login name assigned by your ISP.
Oturum(login) Parolasi Enter the password assigned by your ISP.