Uzaktan Kontrol_NetAgent Help

Uzaktan Kontrol

* This page provides remote UPS testing capabilities. Select a test item, then click 'Apply' to execute the command. (Please refer to the UPS manual for details on specific test functions.)
If you are using a Contact Closure UPS, only the 'Turn off UPS when AC Failed' function is available.

UPS Test Etme

10-Saniye Test Et	This is a 10-second battery test.
_ Dakika için Derin Akü Testi Yap	This is to test if battery works normally.
% _ Akü kapasitesine kadar test et	This function is to execute until battery capacity below set-point.
Akü Düsük Olana Kadar Test Et	This function is to execute until battery low.
Testi Iptal Et	This function is to abort a test when it is executing.

Çesitli

AC Güç Hatasi Oldugunda UPS'i Kapat/UPS'i Yeniden Baslat	Selecting 'Turn off UPS when AC failed' will turn off the UPS. You can reboot the UPS by selecting 'Reboot UPS'.
__ Dakika için UPS'i Uyku Moduna Getir/UPS'i Uyandir	When the UPS is put into Sleep mode, it will not provide power. The UPS will provide power again after Sleep mode time is complete.
UPS'i Yeniden Baslat	When execute such command, UPS load would start over.
UPS'i Uyandir	This function is to start up the UPS.
UPS Sesli Ikazini Aç/Kapat	This is to turn on/ off the UPS buzzer.