SNMPView Lite Ayarlari

UPS Ayarlari
System Configuration

* SNMPView Lite module: Supported on BA Series only (excluding BA516).

This page enables you to discover NetAgent on the local network via one-click search (including the local device) or manually add remote ones. The list presents the added NetAgent and their monitored UPS key data. For each device, options are available to reconfigure settings, access the web interface, or delete it from the list.
	Discover NetAgent on the LAN with one click and add them to the monitoring grid. Automatic addition complete. The UPS type defaults to Single-phase. If your device uses a Three-phase protocol, please change the UPS Type in the Settings. Incorrect data formatting may cause data anomalies.
	For manual NetAgent addition, configure these settings according to the device's SNMP setup.
	If a NetAgent has this icon next to its IP address in the list, it indicates that it is set up to monitor a three-phase UPS.

* SNMPView Lite module: Supported on BA Series only (excluding BA516).

Use this page to configure SNMP and log recording settings for the SNMPView Lite module.

Enabling centralized log storage requires BA devices (except BA516) to save logs from other NetAgents. This increased storage usage may reduce the retention period for local NetAgent logs.