NetAgent A
NetAgentA
  • General
  • Control de Acceso
  • Trap Notification
  • Dispositivo Conectado
Sistema MIB
Nombre del Sistema This section is to give a name to a NetAgent.
Contacto del Sistema This section is to give a name to the administrator.
Localización del Sistema This section is to set NetAgent location.
SNMP UDP Port
This section is to set the SNMP and Trap port. (SNMP default is UDP161 ; Trap default port is UDP162)
SNMPv3 Engine ID
This section is to set the SNMPv3 Engine ID "Format Type" and "Text".
 
 
Administrador de Direcciones IP This section is to set the IP address that the administrator can manage NetAgent from. It is valid for up to 8 IP addresses. To manage NetAgent from any IP address, enter *.*.*.* into "Manager IP address".
Version This section is to set SNMP versions.
When selected "All" or "V3", please click on to set the V3 security settings;
a. Nombre de Usuario -- This section is to set SNMP user's account.
b. Autentificacion -- This section is to select Authentication Protocol.
c. Auth. Password -- This section is to set Authentication Password.
d. Privacidad -- This section is to select Privacy Protocol.
e. Privacy Password -- This section is to set Privacy Password.
Comunidad This section is to set a Community name for NMS. The community name has to be as the same as the setting in NMS.
Permisos This section is to set authorities of administrators. Options are Read, Read/Write, and No Access.
Descripción This section is for an administrator to make notes.
 
Trap Notification
Dirección IP del Destinatario This section is to set receivers IP address for receiving traps sent by NetAgent. It is valid for up to 8 IP Addresses.
Aceptar This section is to set to receive a trap or not.
When selected "SNMPv3 Trap" or "SNMPv3 Inform", please click on to set the V3 security settings;
a. Nombre de Usuario -- This section is to set SNMP user's account.
b. Autentificacion -- This section is to select Authentication Protocol.
c. Auth. Password -- This section is to set Authentication Password.
d. Privacidad -- This section is to select Privacy Protocol.
e. Privacy Password -- This section is to set Privacy Password.
Comunidad This section is to set a Community name for NMS. The community name has to be as the same as the setting in NMS.
Tipo de aviso To select between PPC or RFC1628.
Gravedad This section is to set Trap receiver levels. There are three levels of Trap receiver :
a: Informativo -- To receive all traps.
b: Advertencia -- To receive only "warning" and "severe" traps.
c: Grave -- To receive only "severe" traps.
(Please refer to NMS manual for Trap levels.)
Descripción This section is for an administrator to make notes.
Eventos This section is to select events for NetAgent to send traps. Clicking on "Select" will open a Select Events List. Event Traps may be selected from this list.
SNMP Inform Request
When "Accept" has been selected "SNMPv2 Inform" or "SNMPv3 Inform", please set "Number of Retries" and "Timeout (sec)" here.
 
 
This section is to set the usage power and connection status of other devices which connects to the same UPS as NetAgent uses.