This display the response that NetAgent receives from UPS.
* Serial port settings apply to Manual Debugging Mode only. Not valid in Automatic Mode or during normal NetAgent-UPS communication.
To configure the communication parameter between NetAgent and UPS. Parameters are Debug Mode (this could select between Auto or Manually, default is Auto); Port; Speed (Baud), Data Bits;Parity and Stop Bits. Two encoding formats: ASCII or Hexadecimal. When debug mode is manually, user could enter its parameter under Send Contents column.
: NetAgent Cloud 연결됨
: NetAgent Cloud 연결 해제
: NetAgent Cloud 설정으로 이동
: 현재 사용자
: 로그오프