SNMP 설정_NetAgent Help

MIB시스템

시스템 명칭	This section is to give a name to a NetAgent.
시스템 관리자	This section is to give a name to the administrator.
시스템 위치	This section is to set NetAgent location.

SNMP UDP 포트

This section is to set the SNMP and Trap port. (SNMP default is UDP161 ; Trap default port is UDP162)

SNMPv3 Engine ID

This section is to set the SNMPv3 Engine ID "Format Type" and "Text".

SNMP MIB File

Click the "Download" link on the right to download MIB file from NetAgent.

관리자IP주소	This section is to set the IP address that the administrator can manage NetAgent from. It is valid for up to 8 IP addresses. To manage NetAgent from any IP address, enter ... into "Manager IP address". When entering an IPv6 address, make sure to enclose it in square brackets [] to meet the format requirements.
버전	This section is to set SNMP versions. When selected "All" or "V3", please click on to set the V3 security settings; a. User Name -- This section is to set SNMP user's account. b. Auth. Protocol -- This section is to select Authentication Protocol. c. Auth. Password -- This section is to set Authentication Password. d. Auth. Key -- This section is to set Authentication Key. e. Privacy Protocol -- This section is to select Privacy Protocol. f. Privacy Password -- This section is to set Privacy Password. g. Privacy Key -- This section is to set Privacy Key.
Community	This section is to set a Community name for NMS. The community name has to be as the same as the setting in NMS.
권한	This section is to set authorities of administrators. Options are Read, Read/Write, and No Access.
설명	This section is for an administrator to make notes.

Trap통지

Trap리시버 IP주소	This section is to set receivers IP address for receiving traps sent by NetAgent. It is valid for up to 8 IP Addresses.
사용등급	This section is to set to receive a trap or not. When selected "SNMPv3 Trap" or "SNMPv3 Inform", please click on to set the V3 security settings; a. User Name -- This section is to set SNMP user's account. b. Auth. Protocol -- This section is to select Authentication Protocol. c. Auth. Password -- This section is to set Authentication Password. d. Privacy Protocol -- This section is to select Privacy Protocol. e. Privacy Password -- This section is to set Privacy Password.
Community	This section is to set a Community name for NMS. The community name has to be as the same as the setting in NMS.
Trap 형태	To select between PPC or RFC1628.
표시정도	This section is to set Trap receiver levels. There are three levels of Trap receiver : a: Information -- To receive all traps. b: Warning -- To receive only "warning" and "severe" traps. c: Severe -- To receive only "severe" traps. (Please refer to NMS manual for Trap levels.)
설명	This section is for an administrator to make notes.
이벤트	This section is to select events for NetAgent to send traps. Clicking on "Select" will open a Select Events List. Event Traps may be selected from this list.

SNMP Inform Request

When "Accept" has been selected "SNMPv2 Inform" or "SNMPv3 Inform", please set "Number of Retries" and "Timeout (sec)" here.

This section is to set the usage power and connection status of other devices which connects to the same UPS as NetAgent uses.