네트워크 설정_NetAgent Help

IP주소

IP주소	This section is to set NetAgent IP address.
서브넷마스크	This section is to set NetAgent Subnet Mask.
게이트웨이	This section is to set NetAgent Gateway.
IP주소찾기	This section is to choose to set NetAgent IP address manually or via DHCP.

* The above 4 sections can be set in Netility as well. NetAgent will reboot after any of the above are changed.

DNS 서버 IP

1차 DNS 서버 IP	This section is to set NetAgent primary DNS Server IP address.
2차 DNS 서버 IP	This section is to set NetAgent secondary DNS Server IP address. NetAgent will use the secondary DNS Server IP address when the Primary DNS Server IP address is not working.
DNS 서버 IP주소찾기	This section is to set DNS IP manually or get it automatically from the router.

Please refer to "IPv4" tab or router's settings for the settings.

설정

연결방식	This section is to set communication speed between NetAgent and Network. NetAgent will reboot after Connection Type is changed.
네트워크가 끊어졌을경우 UPS 통신 중단	This section is to set if stop UPS communication when NetAgent disconnects with Ethernet.

IEEE802.1X/Security

EAP Method	Select the EAP authentication method. Currently supported: EAP-PEAP / EAP-TLS / EAP-TTLS.
사용자명	Enter the username for authentication.
패스워드	Enter the password corresponding to the username.
CA Certificate(.pem)	Select the root certificate file (.pem format) issued by the Certificate Authority (CA) to verify the server certificate's validity.
Identity	Enter the identifier used to recognize the client identity (e.g., the CN field).
Client Certificate (.pem)	Upload the client certificate file (.pem format) to prove the client identity to the authentication server.
Private Key (.p12/.pfx)	Select the client private key file (.p12 or .pfx format) to be used in pair with the client certificate.
Private Key Password	Enter the password to protect the private key file.

* Please upload the certificate in [EAP Certificate] before configuring this setting.

* This is a free service that allows the user to alias a dynamic IP address to a static hostname.

서비스공급업체	NetAgent can be configured to register with any of the Dynamic DNS providers. In general, to register a Domain Name; a. Go to the DDNS provider website listed. b. Register a new user account and password with the DDNS provider. c. Choose a Domain Name to point to your current Dynamic IP d. Enter information obtained in (b) and (c) into NetAgent DDNS fields
도메인 이름	This is the Domain Name you have created from the above selected DDNS provider.
로그인명	This is the Login / Account name that you have created with the selected DDNS provider.
로그인암호	Enter the Password you have assigned to your DDNS Account.
외부 STUN를 이용하여 대중 IP를 찾아 등록	Choose Yes to ensure that NetAgent uses the WAN / Public IP to update the selected DDNS server.

* Use this option to allow NetAgent to connect to the Internet directly using your xDSL modem. Once set-up, NetAgent will connect directly to the Internet without going through a router.
The LCD of BA505 will display the current WAN / Public IP instead of the LAN IP Address.
System will reboot if any configuration applies.

연결이 확실히 되었을때	This is to set if use PPPoE to connect with NetAgent UPS. Disabled -- Default setting. Connect always -- NetAgent will automatically dial up and maintain continuous connection.
로그인명	Enter the login name assigned by your ISP.
로그인암호	Enter the password assigned by your ISP.

This page allows you to upload client certificates for EAP authentication to support secure, certificate-based network access (e.g., IEEE 802.1X).