Wireless LAN_NetAgent Help

	Click on this icon to view the saved WIFI list.
	Click on this icon to refresh the WIFI list.
	This icon indicates that WiFi has been connected.
	This icon indicates that WiFi is NOT connected due to incorrect password.
	This icon indicates that it is an encrypted WiFi.
	This icon indicates that it is an unencrypted WiFi.

* This page is for the BA series and is used to set up the device's wifi hotspot, allowing other devices to access the device through the hotspot connection.

HotSpot Enable	This section is to set whether to enable the hotspot function.
SSID	This section is to set the SSID, other devices can search for the wifi of this name.
Password (Min. 8 characters)	This section is to set password for wifi hotspot.

IP주소

IP주소	This column shows the wireless network IP address.
서브넷마스크	This column shows the subnet mask of wireless network.
게이트웨이	This column shows the Gateway of wireless network.
IP주소찾기	IP could be obtain by DHCP or manually.

DNS 서버 IP

1차 DNS 서버 IP	To set the wireless network primary DNS IP.
2차 DNS 서버 IP	To set the wireless network secondary DNS IP. When primary DNS cannot be access, it will direct to the secondary DNS.

Please refer to "IPv4" tab for the settings.

* The [Hotspot] and [P2P] features on the BA series cannot be enabled simultaneously.
* A compatible USB wireless adapter with two-way communication capability is required to use this feature.

Once P2P is enabled, look for the SSID "DIRECT_" on your Wi-Fi Direct device (e.g., a laptop). Connect to this network, then enter the gateway address (default is 192.168.1.2) in your browser to access the NetAgent A web interface for local setup and monitoring.

This page allows you to upload client certificates for EAP authentication to support secure, certificate-based network access (e.g., IEEE 802.1X).