System_NetAgent Help

시스템시간

시스템시간 (월/일/년 시/분/초)	This section is to set NetAgent system time manually. Set this in the format: yyyy/mm/dd hh:mm:ss
자동업데이트간격	This section is to set an interval for time synchronization.
시간 서버	Choose the nearest "Time Server" to your NetAgent location. The Administrator can choose from the list of a maximum of 30 Time Servers.
시간대(GMT 기준)	This section is to set a different time zone for different countries. Check "Auto-Adjust" for NetAgent to auto-detect the time zone (Internet connection needed).
절약시간 사용	This section is to set whether to use Daylight Saving Time. If enabled, automatically advances the system clock by 1 hour.

재시작

매 ~마다 시스템 재가동 (0: 기능불가)	Use this setting to auto restart the system at a predetermined interval. The default value is set to “0” (disabled). Enter between, 1 to 9999 Minute (i.e., between 1 minute or 166.65 hour) or 1 to 9999 Hour (1 hour to 416.6 days).
30초후에 수동 시스템 재가동	Use this feature to manually restart the system NetAgent restart in about 30 seconds.

인터페이스 언어

NetAgent will automatically presents the web GUI in the language that correspond to the OS system.
If you select "Required only" cookies on your first visit, cookies related to the interface language cannot be written. This results in the inability to save or change the webpage language later.
Go to [System] > [Language] and click the "Clear Privacy Cookies" button. The cookie consent prompt will reappear; please select "Accept All" to save your language settings normally.

이메일 선택

Select the display language for notifications sent via Email (including AI-generated reports), SMS, WeChat, LINE, and Telegram.

This is to configure the parameter of the SysLog server. Please refer to the appropriate SysLog server setting.

* You can choose encrypted or unencrypted settings files to download, encrypted settings files CANNOT be loaded on other devices, and unencrypted settings files CAN be loaded on the same type of device.

Click "Save" to save the configuration to your PC. The text file will have a default format of YYYY_MMDD_####.cfg. Administrator permission required. Use this function to restore a *.cfg configuration that has been saved earlier. Click "Browse…" to the location of the file and click "Restore".